ITEM	DESCRIPTION	PRICE
SUPER SIZE PIC HERE	LITTLE 100PF TOL. +-3% 50 VOLT POLYSTYRENE CAPS BY MIAL NICE CAPS.	10 PIECES FOR ONLY$1.00
	2N3563 NPN HIGH GAIN TRANSISTORS TEKTRONIX PART NUMBER GOLD LEADS..HIGH QUALITY PARTS HERE GET SOME WHILE AVAIL.	PRICE..BAG OF 25 FOR.. $2.50
	100UH CHOKES..650MA 10% TOL.	PRICE..25/$3.00
	1 MEG-OHM 25-TURN TRIM POT BY MURATA PART NO.3102W CLICK HERE FOR PIN OUT AND DIMENSIONS DIMENSIONS ARE IN MILIMETERS	PRICE..$0.50 EA. OR 10/$2.75
	100K-OHM 25-TURN TRIM POT BY MURATA PART NO.3102P CLICK HERE FOR PIN OUT AND DIMENSIONS DIMENSIONS ARE IN MILIMETERS	PRICE..$0.50 EA. OR 10/$2.75
	1K-OHM 15 TURN TRIM POT BY MURATA CLICK HERE FOR PIN OUT AND DIMENSIONS DIMENSIONS ARE IN MILIMETERS	PRICE..$0.50 EA. OR 10/$2.75
	500-OHM 15 TURN TRIM POT BY MURATA CLICK HERE FOR PIN OUT AND DIMENSIONS DIMENSIONS ARE IN MILIMETERS	PRICE..$0.50 EA. OR 10/$2.75
	1 MEG-OHM TRIM POTS BY MURATA SMALL SIZE AND ABOUT 1/4 DIA. ON BODY OF TRIMMER AND LONG LEADS MURATA PART NO.3321-H-105	PRICE...5/$1.00 OR 10/$1.50
	SMALL MICA TRIMMER CAP..RANGE..1-60PF..5MM SIZE APROX AND 100 VDC NICE FOR SMALL PROJECTS..BEND TABS AT RIGHT ANGLE AND HAVE A NICE SURFACE MOUNT TRIMMER CAP	PRICE..2/$1.00
	ARCO TYPE MICA COMPRESSION TRIMMER CAP. 1.5-20PF 350 VDC..SIZE 3/4" LONG BY 5/8" WIDE	PRICE...$.75 EA.
AVID HEATSINK AVID #2049469-05-F	HERE IS A VERY NICE HEAVY DUTY HEATSINK AVID PART NO. 2049469-05-F SIZE IS 2 AND 3/8" TALL BY 1 AND 11/16" WIDE..HAS TAPED HOLED FOR MOUNTING AND ALSO FOR MOUNTING THE TRANSISTOR OR TRANSISTORS OR DRILL AND TAP FOR YOUR OWN SPECS. NOT AVAIL TO INTERNATIONAL BUYERS AND THAT INCLUDES BUYERS FROM CANADA	PRICE $5.00 EACH.
	LITTLE SPDT (ON-OFF-ON)TOGGLE SWITCH COMES WILL ALL MOUNTING HARDWARE.	PRICE..$0.89EA.
	DPDT TOGGLE SWITCH "ON-OFF-ON" INCLUDES MOUNTING HARDWARE AND 6 AMP RATING	PRICE...$1.35 EA.
	DPDT "ON-ON" 10 AMP TOGGLE SWITCH INCLUDES MOUNTING HARDWARE..VERY NICE SWITCH	PRICE..$1.75 EA.
	6 POLE 2 POS. ROTARY SWITCH 1/4" SHAFT PANEL MOUNT MOUNTING HARD WARE INCLUDED	PRICE $1.00 EA.
	JACKSON BROS. 6:1 BALL DRIVE..OUTPUT FITS 1/4" SHAFT AND IMPUT IS 1/4" DIA. FOR KNOBS THAT FIT 1/4" SHAFT...MODEL NUMBER DAF J.B. NO. 4511/DAF..NICE BALL DRIVE.	PRICE $15.00EA.
	1.000MHZ CRYSTALS..HC-6 HOLDER	PRICE..$2.00 EA.
	FERRITE ROD 1 3/16" LONG X 1/4" DIA.	PRICE..3/$1.50
	LITTLE STACK POLE BALUN CORE 2 HOLE..1/2" LONG BY ALL MOST 3/16" THICK BY 3/16" HIGH 61 MATERIAL	PRICE..4/$1.00
	STACK POLE BALUN CORE 4:1 WITH THE WINDINGS ON THE CORE 9/16" LONG BY 5/16" ACROSS THE HOLES ARE 3/16" DIA. 61 MATERIAL DO NOT HAVE A USE FOR A 4:1 BAULUN..THEN UNWIND AND REWIND TO YOUR SPECS	PRICE...3/$1.00
	6 HOLE WIND BAND FERRITE BEAD SIZE OF BEAD IS..3/8" LONG BY 3/16" DIA. HAS A WIRE THRU IT AND THE INDUCTANCE IS APPROX 3 UH EASY TO REMOVE AND WIND TO YOUR SPECS.	PRICE 12/$1.00
	DELEVAN SLUG TUNNED COIL. 15/16" LONG AND DIA. 3/8" DIA... 2 TYPES AVAIALBLE. 1.3-3.6UH 2.0-6.0UH LITMITED SUPPLY AVAIL. NEW OLD STOCK.	$3.50 EA.
	455KHZ IF TRANSFORMER..10MM SIZE. IST IF..CORE YELLOW..NICE PARTS AND PRICED RIGHT ALSO. NEW OLD STOCK.	$.49 EA.
	LITTLE SLUG TUNNED COIL FORM.CENTER TAPPED...INDUCTANCE RANGE 3.66UH-10UH..CENTER TAP. RANGE .065UH-1.5UH...NICE LITTLE SLUGED TUNNED COIL FORM. NEW OLD STOCK.	PRICE 10/$2.00
	DUAL WINDING SLUG TUNNED COIL FORM SIZE IS..3/4" LONG BY 1/4" DIA. INDUCTANCE IS LARGEST WINDING IS 1.948UH ADJ. SMALLER WINDING IS 1.555UH ADJ. USE AS IS OR REWIND TO YOUR SPECS.	PRICE..3/$1.00
	1UH METAL CAN..SLUG TUNNED..ADJ. A BIT ABOVE 1UH AND BELOW 1UH..NICE PART..SIZE OF CAN..3/4" HIGH AND 5/16" WIDE. NEW OLD STOCK.	PRICE 5/$1.00 special deal..buy 10 pieces for..$1.50
	TOKO LITTLE DUAL WINDING COIL..NO SLUG..ONE SIDE ( 2 PIN SIDE )INDUCTANE IS..7.81UH..OTHER SIDE ( 3 PIN SIDE ) INDUCTANCE RANGE IS..47.78 UH..SIZE OF THE COIL WINDING AREA IS...7/8" TALL..USE AS IS..OR REWIND TO YOUR OWN SPECS..NEW OLD STOCK.	PRICE 4/$1.00
	SMALL COIL..NO SLUG..INDUCTANE OF COIL ON FORM IS...56UH..COIL FORM SIZE..3/8" HIGH..AND DIA. 1/4"..BASE HAS 5 PINS..3 ON ONE SIDE..2 ON THE OTHER..SO CAN REWIND THECOIL IF DESIRED. NEW OLD STOCK.	PRICE 10/$1.00
	SMALL COIL FORM..NO SLUG..INDUCTANCE 180UH..COIL FORM SIZE..3/8" HIGH..AND DIA. 1/4"..BASE HAS 5 PINS..3 ON ONE SIDE..2 ON OTHER SIDE..SO YOU CAN REWIND THE COIL IF SO DESIRED..NEW OLD STOCK.	PRICE 8/$1.00
	CAMBION SLUGGED TUNNED CERAMIC COIL FORM..SIZE OF COIL AREA ON FORM..1/2" LONG 3/16" DIA. BASE HAS 5 PINS..NICE LITTLE CERAMIC COIL FORM..NEW OLD STOCK.	PRICE $1.00EA.
	J. W. MILLER COIL FORM..NO PART NUMBER AVIAL. LENGHT OF THE CERAMIC FORM IS..11/16" LONG AND DIA. 1/4".. RED CORE..NICE PART..LIMITED QUANTIES..	PRICE $2.75EA.
	13-36MH OSCILATOR COIL. MFG.STANDWYCK..2" LONG X 3/8" DIA. 250 MA.	PRICE $5.00EA. SHORT TERM SPECIAL.
	4.5-20MH OSCILATOR COIL. MGG. STANDWYCK.. 1 7/8" LONG X 1/4" DIA. 250MA.	PRICE $2.50EA.
	455KHZ 10MM SIZE RED CORE 2ND IF SLUGED TUNNED IF CANS	PRICE..4/$1.00
	J.W. MILLER SLUGGED TUNNED IF CAN..PART NUMBER 9051 TUNNING RANGE 3.0UH-7.0UH..NICE PARTS..NEW OLD STOCK...	PRICE $0.79EA. FINAL CLOSE OUT PRICE. 10/$3.00
	DUAL FT-243 CRYSTAL SOCKET VERY RARE ITEM..	PRICE..$4.50 EA.
	FT-243 CRYSTAL SOCKET VINTAGE ITEM..NO LONGER MADE	PRICE..$4.00 EA. SOLD OUT
	OLD STYLE CRYSTAL SOCKET THESE ARE FOR THE CRYSTALS THAT ARE A BIT LARGER THAN FT-243 TYPES	PRICE..$4.00 EA.
	HC-6 CERAMIC CRYSTAL SOCKETS	PRICE...$1.85 EA.
	VINTAGE PHENOLIC 3 PIN TRANSISTOR SOCKET APROX SIZE..5/16" FROM THE ROUND SISE ACROSS TO THE BEVELED SIDE.	PRICE..$.69 CENTS EA..
	LITTLE VINTAGE TRANSISTOR SOCKET SIZE..3/16" SQUARE	PRICE..3/$1.00
	3579.545KC CRYSTAL HC-6 TYPE HOLDER	PRICE..2/$1.00 Summer special..on the 3579.545 hc-6 crystals.. 4/$1.00 SUMMER Special ends AUG. 31-2010
	PC BOARD SPACER KIT NO.1 Nice pc board spacer kit. This is for 2 sets...4 spacers per set..includes the 6-32 machine screws Spacers are 5/8" long and dia. is 1/4" So..you get 8 spacers and 16 machines screws	PRICE ON THIS SPACER KIT $1.00
	PC BOARD SPACER KIT NO.2..7/16" X 3/8" AND 6/32 THREADS.. COMES WITH 4 SPACERS { AS THE 1 SPACER SHOWN IN PHOTO }AND 8 6-32 MACHINE SCREWS.	PRICE..1 SET FOR $1.00
	PC BOARD SPACER KIT NO.4..7/16" LONG X 3/16" DIA. SOLID BRASS SPACERS...4-40 THREADED STUD ONE END..AND OTHER END THREADED FOR 4-40 MACHINE SCREW..COMES WITH SCREWS AND NUTS	SET OF 4 FOR $1.00 SOLD OUT
	CERAMIC SPACER 7/16" ACROSS AND 5/16" LONG...6-32 THREADED HOLE AND INCLUDES TWO 6-32 MACHINE SCREWS WITH CAPTIVE LOCK WASHERS	PRICE..$0.65 EA.
	GLAZED CERAMIC SPACER 1 AND 1/2" LONG BY 11/16" WIDE..THREADED ON BOTH ENDS..8-32 THREADS	PRICE..$1.00EA
	1 1/2" LONG BY 1 and 1/4" WIDE BY 5/16" CERAMIC BLOCK..HAS TAPED 8-32 HOLES AND 6-32 HOLES	PRICE..$1.00 EA. SOLD OUT
	SQUARE CERAMIC BLOCK 5/16" SQUARE BY 1 and 11/16" LONG	PRICE $1.00 EA. SOLD OUT
	SMALL THREADED CERAMIC SPACER GLAZED CERMAIC AND SIZE 9/16" LONG BY 3/8" 6-32 THREADED CENTER	PRICE...$0.89 CENTS EA. SOLD OUT

BACK TO MAIN PAGE